4pcs Electric Drill Grinding Wheel Brown Fused Alumina White Corundum Grey Fibre Yellow Cloth Wheel For Polishing Grinding Metal

Specifications:

*Brown fused alumina grinding wheel:

Outer Diameter: 75mm/3inch

Inner Diameter: 10mm

Thickness: 20mm

Hardness is about 8.9, the main content is alumina α- AL203,

Suitable for grinding metals with high tensile strength, such as ordinary iron, ordinary steel, stainless steel, malleable cast iron, etc., such as kitchen k-nives, scissors, etc.

*White corundum grinding wheel:

Outer Diameter: 75mm/3inch

Inner Diameter: 10mm

Thickness: 20mm

Hardness is around 9.0, the main content is alumina -AL203,

Hardness and brittleness are higher than brown corundum, and the grinding grains are easy to break during grinding, so the grinding heat is small.

Suitable for grinding quenched steel high carbon steel high speed steel and thin wall parts, such as quenched outdoor cutting tools.

*Grey fibre wheel:

Outer Diameter: 75mm/3inch

Inner Diameter: 10mm

Thickness: 20mm

The main ingredients are high toughness high temperature resistant nylon fiber and composite abrasive, suitable for metal matte mercerizing effect polishing, deburring, etc.

Suitable for preliminary polishing ceramic marble stone, etc. (to be used with water) 8 suitable for preliminary polishing wood resin, etc.

*Yellow cloth wheel:

Outer Diameter: 75mm/3inch

Inner Diameter: 10mm

Thickness: 13mm

It is softer than wool wheel and slightly harder than white cloth wheel. It is suitable for metal and non-metal mirror effect polishing. Polished metal jade should be used with grinding paste or powder.

The polished wood can be used directly or with a polish wax.

*Quantity: 4pcs

Package Contents:

4x  Grinding Wheels

Note:

1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2. Please allow slight manual measurement deviation for the data.

X-LOCK Fused alumina zirconia sanding mop flap for stainless

X-LOCK Fused alumina zirconia sanding mop flap for stainless

Featrue: fused alumina zirconia
Type: T27/ T29

Grit:36-120A
Fiberglass basal body
X-LOCK quick-change system

Suitable for  ferrous metal, nonferrous metal, plastic, soft&hard wood, stainless etc.

61420115X Ø115(4-1/2”) x 18(45/64”)
61420125X Ø125 (5”)x 18(45/64”)

10Pcs 60# of 4 Inch Fused Zirconia Alumina Flap Disc Polishing Wheel Grinding Wheels 100x16mm For Metal Abrasive Tools

  • **Diameter:100mm/ 4 Inch+Hole diameter:16mm/ 0.63 inch+Thickness:10mm+Grit:60#
  • **Made of Brown corundum of industrial grade aluminum oxide abrasive material for strength, durability and extended disc life
  • **Use for Iron and non-ferrous metals, stainless steel and stone materials and plastics, as well as welding seams, stamping parts flash burr grinding
  • **With high performance of durable, good abrasion resistance, anti-static and anti-clogging
  • **It is more better for The Home, Workshop, Hobbyists, Tradesmen, Builders and DIY Enthusiasts, etc

HIMOSKWA High quality 180*12.7*31.75mm 46k ceramic parallel white fused alumina grinding wheel

PRODUCT SPECIFICATION

1.EXTERNAL DIAMETER:18CM

2.INTERNAL DIAMETER:3.175CM

3.THICKNESS:1.27CM

4.GRIT:46

Bellota 50503-40 Flap Disc for Smoothing Down Silicon Carbide Stone, Silicon Carbide 40, Polyamide Base, 115 mm

  • Flat polyamide base for work on flat surfaces
  • Does not mess or scratch the worked surface
  • Maximum use of the disc as the nylon base can be used
  • Blade disc for grinding stone or non-ferrous materials

Dremel 85422 Silicon Carbide Grinding Stone for Grinding, Sharpening and Engraving in Stone, Glass and Non-ferrous Metals (19,8 mm)

  • Dremel accessory (85422) silicon carbide grinding stone is designed for grinding, sanding, engraving and sharpening of various tough materials
  • This thin grinding stone is effective for use on hard materials such as stone, glass, ceramics, porcelain and non-ferrous metals
  • Made from quality silicon carbide for more hardness and better durability
  • Working diameter 19.8 mm; Shank diameter 3.2 mm; Recommended maximum speed 40,000 RPM
  • Included: 1x silicon carbide grinding stone for use with rotary tool

Silicon Carbide Alumina Cut-off Wheel Metallographic Cutting Disc

The cutting off is the most important and delicate preliminary stage of the metallographic sample.
The use of an unfit wheel might irreparably prejudice the final results of the analysis because an overheated surface irretrievably changes the main features of its structure.
Getting an optimal finish at the end of the cutting action, is also essential to reduce the polishing time of the sample or the possible coupling with other surfaces.

Main features of the product:

  1. Sharp cutting to avoid breakage.
  2. The heat affected layer of the sample is shallow and there is no issue changes by cutting from the parental segmentation
  3. Suitable for non-ferrous metal materials with HV>600.
  4. Made of high-strength resin and selective abrasive material.It has long-life usage and high efficiency.
  5. Color: Black / Red

AmaCupid 6 inch Green Silicon Carbide Bench Grinding Wheel, 1/2 Arbor, 3/4 Thickness, 80 Grit.Applied in The Grinding of Cemented Carbide and Non-Ferrous Metals and Non-Metallic

  • High quality: Green silicon carbide grinding wheel is made of first grade sand, silicon carbide and binder at high temperature sintered, It is also called ceramic grinding wheel. Wear-resistant ,durable,strong toughness (Poor grinding wheel is reclaimed sand)
  • Features: Green silicon carbide grinding wheel, high hardness, high brittleness, sharp abrasive grains and good thermal conductivity. It is suitable for the grinding of non-ferrous metals such as cemented carbide tools and workpieces, as well as the grinding of non-metals such as optical glass, ceramics, and stone. It has the characteristics of not burning to the cutter head and not burning the workpiece
  • Dimensions: Green Silicon Carbide Grinding Wheel diameter 6 inch /150mm, center hole 1/2 inch /12.7mm, thickness about 7.88 inch / 20m. The standard size grinding wheel is mounted on the type 150 grinding wheel machine, please follow your machine Model, choose the grinding wheel that suits you
  • Safety and Precautions: The workbench and the base grinder must be fixed, the machine without a fixed base will move, causing grinding and injury.Before installing the grinding wheel, please check and operate according to the instructions provided. Please take personal protection before grinding wheel work
  • After-sales:If you have any questions about our products, please feel free to contact us. We will try our best to solve the problem until you are satisfied

Dremel 454 Chainsaw Sharpening Grinding Stones Multipack, 3 Grinding Stones for Precise, Quick and Easy Sharpening of Chain Saw Blades (4,8 mm)

  • Dremel accessories chainsaw sharpening grinding stones are designed for precision grinding and sharpening of ferrous materials such as chain saw blades
  • Precise: Especially designed as chainsaw sharpener, this grinding stone features a precision-ground abrasive for precise sharpening of the chainsaw chain
  • For optimal results, it is recommended to be used with Dremel Chainsaw Sharpener Attachment 1454
  • Working diameter 4.8 mm; Shank diameter 3.2 mm; Recommended maximum speed 30,000 RPM
  • Included: 3x grinding stone for use with rotary tool

Stainless Steel Honing Guide With Brass Roller Sharpening Sharpener Honing Guide For Wood Planer Flat Sharpening For Woodworking

Bullet Points:
1、Stainless Steel Material: The honing guide is made of stainless steel material, not easy to rust, lasting and durable.
2、Clamping Width Range: 0.2-3.2'' / 5-82mm. Plane Iron Max Clamping Width is 82mm / 3-1/8'', Chisel Max Clamping Width is 55mm / 1-7/8in.
3、Ball-bearing Brass Roller Wheel: Ball-bearing brass roller wheel, move back and forth without restriction during sharpening.
4、Simple to Use: Move guide up/down on blade to increase/decrease angle, stainless steel brass roller glides, simple to use.
5、Applicable Models: Fit for Wood Chisel, Planer, Blade, Graver, Carving Knife, Plane Iron, Flat Chisel Edge Sharpening.
Features:
1. High quality material.
2. Adjustable clamping width.
3. Unique design.
Specification:
Item type: Honing Guide
Applicable: for Wood chisel, planer, blades, graver, carving cutter, plane iron, flat chisel edge sharpening
Color: as shown
Product size: about 82 x 40 x 60mm/3.23*1.57*2.36inch
Material: stainless steel + brass
Wheel size: about 13mmx11mm/0.51*0.43inch
Packing List:
1 x Wheel
or

1 x Honing Guide