Abrasive Flap Wheel Sander Abrasive Flap Wheel Silicon Carbide Abrasive Grinding Head with Handle Metal Grinding Wheel

Abrasive Flap Wheel Sander Abrasive Flap Wheel Silicon Carbide Abrasive Grinding Head with Handle Metal Grinding Wheel

Features: ● Material: The handle of this grind head is made of metal, the abrasive part is made of silicon carbide, and the back material is gauze. Excellent sex comes from high-quality materials and special design.
● Shank diameter: 6mm
● Purpose: suitable for rough grinding, grinding and polishing of a variety of metals and non-metals
● Performance: The alumina abrasive sander is continuously exposed to prevent clogging and provide a uniform finish. It is most suitable as a finishing sander after sanding of heavier surfaces and material removal.
● Note: The installed baffle wheel is suitable for most drill bits. When using it, please rotate it clockwise, do not use it counterclockwise.

Specification: Material:Silicon Carbide Abrasive + Gauze Base
Color :Brown
Size: As the Picture Shows

Package Includes: 1x Grinding Head with Handle

note: 1.Please allow 1-2mm errors due to manual measurement, make sure that you do not mind before you order.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item.

10Pcs Abrasive Sanding Belt 457x75mm Grits Sander Aluminum Oxide Abrasive Grinding Belt Sanding Abrasive Sander Sandpaper Grinding Paper for Polishing Cleaning(600)

  • 【Various Options】The sander belt has 6 different abrasive belts to meet your different needs.
  • 【High Efficiency】The Aluminum oxide sanding belt is wear-resistant and has high grinding efficiency for various materials.
  • 【Durable Material】The sanding belt is made of high-quality alumina, which is a material with high strength, high hardness and good abrasive performance.
  • 【Scope of Application】The abrasive belt is widely used in metallurgy, machinery, shipbuilding, light industry, leather, wood, building materials, textile printing and dyeing industries.
  • 【High Practicality】The belt can be used for grinding and polishing plywood, particleboard, decorative panels, bamboo and rattan products; grinding and polishing complex surfaces, such as stainless steel, non-ferrous metals, ferrous metal sheets and blades; water or oil grinding of metal or non-metal materials, Large surface grinding: polishing and raising of leather, rubber and fabric.

5PCS Polycarbide Abrasive Strip Wheel Paint Removal Disc, Abrasive Wheel Paint Rust Removal Clean Tool for Angle Grinder Abrasive Wheel Rust Removal Clean Tool for Angle Grinder

  • 【Non-Damage Cleaning】 Paint rust remover abrasive angle grinder does not damage the surface of the object, the grinding force is uniform, the processing effect is uniform and wear-resistant, the water resistance is strong, the plasticity is strong, the softness is good, Strips and finishes in one step. Removes rust, paint and other coatings quickly and easily without damaging the original surface.
  • 【High Quality】 Strip wheel paint removal disc is different from the wire brush, high-wearing honeycomb soft abrasive tool formed,it is non-metallic and very safe. Its grinding force is uniform and can perfectly polish the surface of the object. It has good wear resistance and strong water resistance, strong plasticity, good flexibility, and is suitable for grinding of various shapes.
  • 【Low Noise】 Rust removal disc produces low noise and less dust. It is sharper and more wear-resistant than traditional abrasive products. It performs more better than other grinding wheels, steel brushes, emery cloth, and other tools.
  • 【Universal Size】 The diameter of the rust removal wheel is is 100mm, inner diameter: 16mm, thickness: 1.3cm, the maximum speed is 12,500 (RPM), and the safety speed is 9900 per minute. Strip disc wheel is suitable for angle grinders of various models in the market. Each pack has 5pcs.
  • 【Widely Used】 Strip wheel disc performs well in grinding and polishing effect! Perfect for grinding and polishing metal, wood, stone and others! It can be widely used in automobile manufacturing and repairing, construction industry, chemical and light industry, shipbuilding and repairing industry, etc. Very practical tools!

Diameter 125MM Abrasive Cut off Wheel Cutting Properties Allows The Use Of An Abrasive Tool At High Speeds And Loads Metal Cutti

Diameter 125MM Abrasive Cut-off Wheel Cutting Properties Allows The Use Of An Abrasive Tool At High Speeds And Loads Metal Cutting

Product information:

"Abrasive cut-off wheel – diameter 125 mm, fit 22.2 mm, thickness 1.2 mm, designed for cutting metal.

The basis of the wheel is a bakelite bond, which allows the use of an abrasive tool at high speeds and loads.

The cutting part is made of aluminum oxide crystals.

For increased strength, the circle contains fiberglass mesh with multilayer reinforcement.

The cutting wheel has excellent cutting properties, which were developed thanks to the abrasive. "

125mm Abrasive Cut off Wheel Has Excellent Cutting Properties Used For Cutting Metal & An Abrasive Tool At High Speeds And Loads

125mm Abrasive Cut-off Wheel Has Excellent Cutting Properties Used For Cutting Metal & An Abrasive Tool At High Speeds And Loads

Product information:

"Abrasive cut-off wheel – diameter 125 mm, fit 22.2 mm, thickness 1.6 mm, designed for cutting metal.

The basis of the wheel is a bakelite bond, which allows the use of an abrasive tool at high speeds and loads.

The cutting part is made of aluminum oxide crystals.

For increased strength, the circle contains fiberglass mesh with multi-layer reinforcement.

The cutting wheel has excellent cutting properties, which were developed thanks to the abrasive. "

Quantity:10PCS

125mm Cup Nylon Abrasive Brush Wheel Pile Polymer abrasive M14 M16 Angle Grinder Tool for Metal

Description:

Brush cup metal case with pile of polymer abrasive (abrasive nylon) with grain P80 and improved wear resistance is used for deep brashing, stripping, removing the old peeling coating from the tree. The design is most optimal for processing vertical surfaces, walls from logs, regular and glued beams, round and flat. Good crawls into the joints of the walls.

Specification:

Color: Red
Material: Dupont Abrasive Wire, Steel
Diameter: 125mm/5"
Thread Size: M14x2.0mm M16x2.0mm
Speed: 8500RPM
1pc

Package Included:

1pc M14/M16 Wire Cup Wheel Brush

Note:

Please allow 1-2mm errors due to manual measurement.

Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.

8Inch 200mm Sanding Flap Grind Wheel Polishing Disc Abrasive Grit 60#~600# 25mm Bore Flange Abrasive Flap for Metal Wood

Features:

It is 100% new and high quality.

Widely used in grinding, polishing, finishing, derusting of automobile manufacturing, heavy machinery, shipbuilding, steel, aluminum alloy, hardware and decorative industries.

It can achieve an excellent effect on the surface metal finished surface polishing or inner hole grinding, save time, sharp cutting , stable performance, high safety,it is the best abrasive of the surface treatment.

Specifications:
Material: Alminum Oxide

Relaxed outer diameter: 200mm(8″)

Thickness: 25mm(1″)

Hole diameter: 25mm(1″)

Grit: 60/80/100/120/150/180/240/320/400/600#

Color:As Picture Shown

Package Included:

1Pc Abrasive Flap sanding Wheel

Note:

Please be carefully check the goods appearance, size, shape and then compare your original goods before ordering, thank you.

Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.

Since the size above is measured by hand, the size of the actual item you received could be slightly different from the size above. Please don’t mind, thank you!

XCAN Abrasive Wheel Saw Blade 85mm Circular Saw Blade For Metal Cutting Disc Abrasive Tools Grinding Wheel Cutting Discs

XCAN Abrasive Wheel Saw Blade 85mm Circular Saw Blade For Metal Cutting Disc Abrasive Tools Grinding Wheel Cutting Discs

Specification:Type: Grinding Wheel Cutting DiscsDiameter: 85mmSize:85×1.2x10mm   85×1.2x15mm  Note:Please allow 1-3mm error due to manual measurement. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Package Including:1pc Grinding Wheel Cutting Discs

50/100Pcs Abrasive Polishing Wheels Brush Grinding Sanding Head Abrasive Buffing Wheels Metal Scouring Pad for Dremel Dril

Tips:
1:We Have Many in stock for this item,will send out within 48hours after you pay
2:We support the bulk CSV Drop shipping/wholesale orders,contact us and get the VIP price
3:Ship From Overseas Warehouse delivery time:
USA/France(3-12days),UK/DE(3-8days),Spain/Czech/Italy/Poland/Austria (6-15days),
with tracking number and updated information(Germany, UK, can choose France warehouse)
if you have any problem,just feel free to contact us,thank


40/50/100Pcs Abrasive Polishing Wheels Brush Grinding Sanding Head Abrasive Buffing Wheels Metal Scouring Pad for Dremel Dril

A Type:

Size
Shank diameter: 3 mm/ 1/8 inch
Brush diameter: 25 mm/ 1 inch
Length: 46 mm/ 1.8 inch
Quantity: 40 pieces , each grit 10pcs.

B Type:

Material: scouring pad
Yellow: 120 grit
Green: 180 grit
Red: 320 grit
Black: 400 grit
Size: 2.5*5cm
Quantity: 40 pieces

C Type:

Material: scouring pad
Specifications: 25MM Handle: 3MM Shape: T type
Particle size: 120#, 180#, 320#, 400#
Quantity: 100pcs

D Type:

Quantity: 50pcs

Dremel 516 Abrasive Grinding Point, Bullet-shaped Abrasive Point for Deburring Metal Materials (13 mm)

  • This Dremel accessory (516) is an abrasive point specially designed for grinding and light deburring as well as paint and rust removal on conic and flat surfaces
  • Effective to use on materials such as copper, silver, sheet metals, cast iron, brass
  • Ideal for rust and paint removal without removing any of the base material
  • Working diameter 13 mm; Shank diameter 3.2 mm; Recommended maximum speed 20,000 RPM
  • Included: 1x abrasive grinding point for use with rotary tool