150MM 6″ CUTTING DISCS METAL, STAINLESS, STEEL, INOX, CUT OFF WHEELS

A thin 1.6mm disc designed for use with 150mm (6″) angle grinders, either powered or cordless.
Suits Stainless or Mild Steel: Hard, high-performance tool of hardness R (INOX) with high cutting performance and very long tool life for reduced heat build-up during cutting.
No metal ring in the middle of the disc: Pferd moved away from the unnecessary metal ring ‘old technology’ and production process and introduced a new manufacturing procedure and quality control that produces a much better high-performing cutting disc.
Easy Cutting: When using these cut-off wheels one of the first things you notice is how easily it cuts through the steel and stainless steel. You can apply pressure or let your hand guide the wheel with the weight of the angle grinder. The result is a precise cut with very little burr formation.
Long-Lasting: Cutting tests have shown that most thin cut-off wheels start cutting well but deteriorate quickly in comparison to Pferd discs.
Thin and Light: In your hands, these wheels feel thin, very flat, precise, and light with a smooth textured finish that’s comfortable to handle.
You get fewer wheel changes and much better performance to get the job done. Pferd has taken cutting to a whole new level with these wheels, making them perfect for any workshop or tradesperson.
If you thought there is little difference between cut-off wheels and brands then think again. You may be using a cut-off wheel that’s cheap to buy, only to find it’s inferior, dangerous, and costing you much more to use over time.
Highest economic efficiency through longest service life.

4.5" Cut Off Wheels For Grinders – Aggressive Cutting For Metal & Stainless Steel/INOX – 4-1/2" x .048 x .63-Inch

  • 10 Premium 4-1/2 Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | 4-1/2-Inch x .048-Inch x .063-Inch | Optimized for 4-1/2 Angle Grinders and compatible with All 4-1/2 Angle Grinders
  • CUT 2-3X MORE than lower quality or excessively thin wheels due to this wheels Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
  • QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Ying Diaos High-performance aluminum oxide grain and proprietary hard bond
  • AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Ours proprietary strong Synthetic Resinoid Bond that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Inox Metal Cutting Disc 115 x 1 x 22.23mm X-LOCK

The X-LOCK Standard for Inox Cutting Disc delivers reliable performance in Inox. Its thin disc edge supports smooth and easy cutting. Changing cutting discs is fast and convenient thanks to the key less X-LOCK system. X-LOCK cutting discs FITS ALL, including standard angle grinders. Use this disc for cutting Inox.

• Reliable Performance in Inox.
• Thin disc edge supports smooth and easy cutting.
• Bosch cutting discs comply with the maximum safety requirements, such as EN 12413.
• FITS ALL machines, including standard angle grinders.

X-LOCK STANDARD FOR INOX 115MM STRAIGHT CUTTING DISCS X10 PCS

The X-LOCK Standard for Inox Cutting Disc delivers reliable performance in Inox. Its thin disc edge supports smooth and easy cutting. In addition, the disc is free from ferrous, sulphurous and chlorinated fillers.

FEATURES

  • X-LOCK Standard for Inox Cutting Disc delivers reliable performance in Inox
  • Thin disc edge supports smooth and easy cutting
  • Disc is free from ferrous, sulphurous and chlorinated fillers
  • Bosch cutting discs comply with the maximum safety requirements, such as EN 12413
  • X-LOCK cutting discs also fit standard angle grinders
  • Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system

Bosch Inox Metal Cutting Disc 115 x 1 x 22.23mm X-LOCK

The X-LOCK Standard for Inox Cutting Disc delivers reliable performance in Inox. Its thin disc edge supports smooth and easy cutting. Changing cutting discs is fast and convenient thanks to the key less X-LOCK system. X-LOCK cutting discs FITS ALL, including standard angle grinders. Use this disc for cutting Inox.

• Reliable Performance in Inox.
• Thin disc edge supports smooth and easy cutting.
• Bosch cutting discs comply with the maximum safety requirements, such as EN 12413.
• FITS ALL machines, including standard angle grinders.

High Quality 4″ Single Net Cutting Wheels for Inox and Metal

Features:
1. Highly bonded strength, impact resistance;
2. Sharp,easy & smooth cutting; efficient & safe; no burrs ;
3. Excellent heat dispersion and efficient working efficiency;
4. Various color: black, red, green, yellow.
Applications:
1. Cutting round steel, stainless steel, inox, copper, aluminum, alloy steel etc.;
2. Groove cutting, slotting and cut off working pieces;
3. Be widely used in finish machining and pipe processing industry etc.

Bosch Inox Metal Cutting Disc 115mm

If you need to cut Inox, this metal cutting disc from Bosch is designed specifically for the job. Its thin edge gives great results on stainless steel and other ferrous metals, supporting smooth and easy cutting.

Intended for use with Inox, the cutting disc is made from aluminium oxide and is free of ferrous, sulphurous and chlorinated fillers. Stainless steel is notoriously difficult to cut, however, this reliable disc will make light work of the task and leave you with a clean finish with less burring. It also creates less noise, dust and heat, meaning less damage and discolouration. The Bosch cutting disc comes in a closable metal tin for safe storage when not in use.

• For use with (stainless) steel and other ferrous metals

• Thin disc edge supports smooth and easy cutting

• Aluminium oxide disc specifically designed for use on Inox

• Free of ferrous, sulphurous and chlorinated fillers

• Supplied in reclosable metal storage tin

• Meets EN 12413 standards for rotating bonded abrasive products

• Size: 115 mm

Bosch Professional 2608601520, 5 Expert for Inox Cutting Discs (for Stainless Steel, 76 x 10 x 1 mm, Accessories for Angle Grinders), Gray

  • Bosch Professional Expert for Inox cutting disc (A 60 R Inox BF)
  • Compatible with angle grinders with 10 mm socket, e.g. GWS 12V-76
  • Suitable for stainless steel/Inox and steel applications
  • Maximum circumferential speed up to 80 m/s
  • Disc diameter: 76 mm, bore diameter: 10.00 mm, disc thickness: 1.0 mm

Woltersberger® INOX Flap Discs Diameter 125 mm Grain 80 Pack of 10 Blue for Stainless Steel, Metal/Steel, Wood Zirconia Coround Abrasive Mop Lamellar Discs

  • Woltersberger INOX Flap Discs Diameter 125 mm Grain 80 Blue for Angle Grinder with Abrasive Mob Plate Pack of 10
  • First-class professional quality, suitable for many common cutting grinders and angle grinders with 22 mm intake
  • The blue INOX fan discs have been specially designed to work with stainless steel and are characterised by a uniform grinding pattern until the complete consumption of the abrasive grain
  • The slat discs are available with 115 mm and 125 mm diameter in grits P-40, P-60, P-80, P-120

kwb 712021 Thin Wheels for Angle Grinder 115 mm Flex-Disk f. Stainless Steel INOX in Storage Box incl. earplugs ABM. 115 x 1.0 x 22.23, Cutting Discs, ø 115 mm

  • Each cut-off wheel is extra thin for less material loss and has a size of 115 mm x 1, 0 mm with 22, 23 mm bore, so it can be used on one-handed angle grinders. Included ear plugs provide the necessary protection for your ears against the high-pitched sounds when cutting metal.
  • The flex-disc is ideal for cutting steel sheets and pipes. This cutting disc is particularly suitable for cutting stainless steel.
  • Can be used with many types of machines, such as cordless angle grinders and cut-off machines with a speed of 80 m/s The metal edge in the hole guarantees a secure fit in the machine.
  • Milling discs can be used in commercially available machines with a maximum of 13,300 rpm: to ensure safe working, the maximum recommended speed of the machine should not be exceeded.
  • The disc consists of a synthetic resin-corundum mixture and is free of iron, sulphur and chlorine for use in rust free steels.