Top Quality Circular Saw Blade (Skill Saw) 300mm x 32mm with Bore (30mm 25mm Reduction Ring) for Wood Cutting Discs Circular 300mm x 32mm x 40 Teeth

  • 300mm x 32mm x 40T Teeth Circular Saw (Skill Saw) Wood Cutting Disc
  • Comes With Bore Reductions Rings (30mm 25mm) TCT (Tungsten Carbide Tipped)
  • Cuts all types of wood, softwood, hardwood, particle board, MDF, hardbord and plywood
  • Fits most Saw Cutters-Thin profile cuts faster and reduces waste
  • Max RPM-3500 Max- 62m/s

Vortex Diamond VSS 300mm/12" Dry or Wet Cutting Segmented Diamond Saw Blades for Concrete Stone Brick Masonry (300mm/12")

  • Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
  • Can be used wet or dry. For light or medium duty cutters.
  • Sintered diffusion bonded.
  • Diameter 300mm/12″. Segment height 10mm. Arbor 20 mm.
  • This diamond blade belongs to Vortex Diamond General Purpose Segment Series

100mm 300mm Sanding Flap Grind Wheel Aluminum Oxide Sanding Disc Polishing Abrasive Disc Grit 60~1000# 16mm/25mm/32mm Bore

300MM  Place an order here

100mm 150mm 200mm 250mm 300mm Sanding Flap Grind Wheel Aluminum Oxide Sanding Disc Polishing Abrasive Disc Grit 60~1000Grit 16mm/32mm/32mm Bore New 1PC

Special instructions

Suppose you buy a 200mm size, the product at rest is between 160mm and 180mm, and the size after rotation is 200mm


It is 100% new and high quality.

Widely used in grinding, polishing, finishing, derusting of automobile manufacturing, heavy machinery, shipbuilding, steel, aluminum alloy, hardware and decorative industries.

It can achieve an excellent effect on the surface metal finished surface polishing or inner hole grinding, save time, sharp cutting , stable performance, high safety,it is the best abrasive of the surface treatment.

Material: Alminum Oxide

Relaxed outer diameter: approx 100mm/150mm/200mm/250mm/300mm

Thickness: approx 10mm/25mm/30mm/35mm/40mm

Hole diameter: 16mm/25mm/32mm


Color:As Picture Shown

Package Included:

1Pc Abrasive Flap sanding Wheel


Please be carefully check the goods appearance, size, shape and then compare your original goods before ordering, thank you.

Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.

Since the size above is measured by hand, the size of the actual item you received could be slightly different from the size above. Please don't mind, thank you!

75/125/125/150/180/250/300mm Metal Grinding Disc Resin Cutting Wheel Angle Grinder Ultrathin Blade for Metal Iron Stainles Steel


– The Fiber reinforced resin cutting disc grinding wheels, made of high grade alumina abrasive, modified sand, good toughness and hardness, better cutting effect.

– This metal cut-off wheel has abrasive sand distribution uniform, fast grinding speed, sharper cutting, long service life.

– Cutting disc has a built-in reinforcing mesh cloth, enhance tensile strength, high safety, good toughness.

– The cutting wheels is thickly inlaid steel ring, anti-rust electroplating treatment of hole ring, firmly inlaid, high safety.

– Scope of application: alloy steel, stainless steel, cast iron parts, etc., grinding and cutting.


Color: as the picture show

Material: Resin & Corundum

Outer Diameter: 75mm 105mm 115mm 125mm 180mm 250mm 300mm

Inner Diameter: as the picture show

Thinckness: as show

Max Speed: as show

Package Included:

1/2/5/10/15/20/25/30/40/50pcs Resin Cutting Disc


Please be carefully check the goods appearance, size, shape and then compare your original goods before ordering, thank you.

Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.

10PCS Hacksaw Blade Set 300mm M35 Steel Hand Saw Blades 14T/18T/24T Bi Metal Blades For Meat Wood Cutting Disc Woodworking Tool

Product name: Hacksaw Blade
Material: M35 steel
Color: blue + red
Size: 300 x 12 x 1mm / 11.8 x 0.47 x 0.04 in
Teeth: 14/18/24 teeth (optional)
Application: bamboo, bone, frozen meat, PE pipe, PVC pipe, etc
Quantity: 10pc

【Wide Application】These hacksaw blades have excellent cutting performance and are ideal for cutting various materials, such as bamboo, bone, frozen meat, PE pipe, PVC pipe and more, and can meet various needs in your life.
【Durable Material】These hand hacksaw blades are made of high-quality steel material, which is featured with nice flexibility, wear-resistant and durable, not easy to break, can bring you a long time and comfortable using experience.
【Nice Cutting Performance】The carbon-strength steel body is sharp and durable, having a good flexibility and ductility. Saw blade teeth has high speed and efficiency characteristics when cutting.
【Proper Size】There are 14/18/24 teeth hacksaw blade for you to choose. Each measures approx. 300mm / 11.8 inch in length, 1mm / 0.04 inch in thickness, 12mm / 0.47 inch in width, proper size for your daily replacement.
【Package Content】You will get 10pcs hacksaw blades, sufficient quantity can meet your different needs. They are good choice for cutting variety of materials, very practical and useful in daily life.

1. Please allow 1-3cm measuring deviation due to manual measurement.
2. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!

2Pcs 300mm Meat Bone Ice Cutting Stainless steel Reciprocating Saw Blades Power Meat Cutter, Meat Saws, Saw For Bone Meat


*2 pcs 300mm  Reciprocating Cutting tools For Cutting Ice and Frozen Meat

*100% Brand new and high quality

*Made of high quality material, more durable.

*Sharp and lightweight and durable to use.

*Color:Silver (As Pictures Show)

*Material:Stainless steel

*Dimension: 300*19mm(Approx.)

Package Contents:

2*Cutting tools

Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

30 120/200/300mm Alloy Steel Circle Hole Saw Drill Bit Adjustable Aircraft Type Cordless Wood Cutter Tool Kit for Woodworking


  • Product Name: Hand Tools and Combination

  • Material: Alloy Steel

  • Use: Wood Drilling

  • Type: Center Drill Bit

  • DIY Supplies: Woodworking

  • Surface Treatment: Polishing

  • Features:
    – The hole is round and cut flat,smooth and burr free, and the roundness is good.
    – Applicable materials with wood board, plastic board, plywood and gypsum board, etc.
    – Can be used again after polishing.
    – Widely used in DIY speaker opening, spotlight opening, woodworking opening, plastic plate opening, etc. (working depth 25mm)
    – The diameter of the hole can be adjusted by the distance from the tip to the center.
    – Exquisite superior performance wide application.

  • Standard: Metric

  • Adjustable Capacity: 30 – 120mm / 200mm / 300mm

  • Boring Thickness: 1/8 inch (3mm)-2 inch (50mm)

  • Use:
    – Set both cutting blades on blade holders tightly and correctly as shown in figure A.Figure B & C are in correct.
    – To adjust the size locate the inner edges of the blade holders against the size graduation.For example number 40 for a 1(40mm)dia.Hole.
    – Use the chisel end drill when boring thin wood while use the twist drill when wood is thick.
    – Before boring hold two sides of veneer of timber firmly by stepping on it.
    – Then stare boring after cautiously setting the twist drill or chisel end drill at the center of the desired hole.
    – When using power drill,be sure to contact the cutting blades gradually and slowly on the object to be bored.Abrupt contact of the blades on the boring object can give shock to your hands.
    – When deep boring-1(25mm) up to maximum 2(50mm)-is desired,use the free doughnut from one side of timber,and then start boring again from the other side until the cutting blades bore through a hole making doughnut-shaped disc.
    – By way of using optional measure bar.Large hole with maximum diameter of 8 inch (200mm)can be bored.

  • Note:
    – All the hex screws are tightly screwed in before you start boing in any case before you start boring hold both sides of the cutting objects firmly by two foots.
    – When replacing the drill bit, it is necessary to cut off the power supply and then replace it. The drill cuttings generated during drilling are strictly prohibited from being cleaned by hand, and special tools are used for cleaning debris.

  • Retail Packaging: Yes, General Box

Package include

  • Package Including:

  • 1 x Adjustable Circle Hole Saw Cutter Tool

1pc Diameter 150/180/300mm Carbide Circular Saw Blade For Wood Plastic Saw Blade 40/60T Cutting Disc

1pc Diameter 150/180/300mm Carbide Circular Saw Blade For Wood Plastic Saw Blade 40/60T Cutting Disc


-Made of high quality carbide, the cutter head is high hardness, sharp and durable.
-Automated cutting of the substrate, good hardenability, superb heat treatment process, the steel substrate is not easy to deform a lot of pieces.
-More cutting edges, shock absorption and durability.
-Larger chip space, the front corner cuts more brisk.
-Interlaced tooth design with smooth cut surface.


-Material: Carbide
-Color: Silver
-Teeth: 40/60/80/100/120
-Diameter: 150/180/300mm
-Bore Diameter: 25.4/30mm
-Thickness: 2.2/3mm


Born to conquer the professional job site, the all-new R300DCT+ electric disc cutter is the perfect masonry saw for the professionals when effective dust control is a must. It has an impressive cut depth of 115mm, making this one of the deepest cutting 300mm machines on the market. Built-in dust suppression is provided by a dual-sided water delivery system featuring armoured external hosing and tough corrosion-resistant brass connections. Fully compliant with dust management regulations, it also helps reduce heat and friction for improved blade life.


  • Huge cut capacity – the all-new Evolution 300mm / 12 inch concrete cutting saw can cut up to 115mm / 4-1/2 inches deep! That’s more capacity than most leading petrol-powered saws
  • High torque motor – delivers consistent peak power and prevents the machine from stalling under heavy-load
  • Electronic brake – safety counts, and that’s why all our new DCT Electric Disc Cutters feature advanced electronic brake control
  • Low maintenance vs petrol-powered saws – no pull chords, no petrol and no servicing, saving you time and money
  • Steel front handle with rubber over-mould gives the user total control and lives up to the toughest jobs
  • Full wrap-around design makes it easy to make a cut at any angle
  • Large blade coverage & built-in dust port with rubber cap for easy vacuum attachment, protects the user from flying debris and optimises dust suppression and collection
  • Low vibrations – the smooth yet powerful electric motor makes for easy operation and can be safely used for long periods of time
  • No harmful fumes emitted, making it safer to use.
  • Optimised balance and even weight distribution puts the centre of gravity squarely between the handles for effortless use of the machine, making it great for prolonged use
  • Adjustable blade guard with single-handed operation allows for quick adjustments while holding the tool, and keeping your hand away from the blade


The all-rounder in all building materials. The universal 300mm diamond blade is ideal for wet cutting when using machines such as a petrol saw or table saw.This blade enables effortless cutting.


  • The diamond cutting disc is a problem solver in all building materials.
  • Sintered diamond cutting segments.
  • Best for cutting: Concrete / Stone


  • Diameter: 300mm
  • Bore Diameter: 20mm
  • Segment height: 8mm
  • Cutting width: 3.2mm
  • Weight: 2kg